VACUUM COLD MOUNTING SYSTEM Air-Out-Mounting Machines-QMAXIS Testing (Nanjing) Ltd.

QMAXIS vacuum cold mounting system Air-Out is made in USA.

Air-Out: Vacuum cold mounting system for pore impregnation

Order Hotline：0086-186-0255-6086

QMAXIS-浮雕png-终稿.png

VACUUM COLD MOUNTING SYSTEM Air-Out

Vacuum Cold Mounting System Air-Out Performances：

● Large vacuum chamber, special dome design, 13% more capacity than the conventional hemispherical dome, can be placed

12 30mm molds.

● Thick chamber wall, molded of all-clear polycarbonate, explosion-proof, can be kept at 740mm Hg (0.09MPa) for 24h

after evacuation, temperature resistance 41℃.

● 3-way stopcock made of teflon, red plug to control the flow of air soothingly and gently, avoiding turbulence.

● O-ring made of neoprene, no vacuum grease is needed, room temperature down to 0 ℃ its elasticity and sealing performance is

not affected.

● Perforated carrier plate, polypropylene, with 22 small 3.2mm holes for air easy flow and 2 19.4mm side holes for easy hold the

carrier plate.

● The vacuum chamber is all-clear, the whole mounting process is visible.

Air-Out真空系统-2

Vacuum Cold Mounting System Air-Out Technical Parameters:

Chamber Outside Diameter	273mm
Chamber Inside Diameter	240mm
Carrier Plate	230mm，Perforated Polypropylene
Overall Height	311mm
Net Height Above Carrier Plate	197mm
Stopcock Valve	3-Way, Connected With ID. 6.35mm Hose And Vent Plug
Silicone Vacuum Hose	ID. 6.35mm, Length 900mm, Connect The Pump And Chamber
Main of Pump	220V, 1.9A, 1 Phase, 50Hz
Motor Power of Pump	90W
Gauge	Vacuum: -"Hg / -bar(g), Pressure: psi / bar
Max. Vacuum	-24"Hg / -0.8 bar(g) / 0.2 bar(abs)
Max. Pressure	60psi / 4.2bar
Free Air Capacity	1CFM / 28.3L/min
Noise Level	Vacuum: 65-73dB, Pressure: 54-56dB
Dimensions (W×D×H)	Vacuum Chamber: Φ273×H311mm，Pump: 133×195×279mm
Weight	Vacuum Chamber: 1.5kg，Pump: 6.5kg

Vacuum Cold Mounting System Air-Out Ordering Informations:

Part Number	Description
Air-Out 230	Vacuum Cold Mounting System Air-Out 230