Do you usually do metallographic sample inlay, with small sample inlays being the majority? Especially Φ For samples of 50mm and below, the standard fixture sample size is basically from Φ 25mm- Φ 50 mm, which requires that the standard size of the sample inlay should meet the size requirements of the fixture, and the matching metallographic inlay machine inlay cylinder should be configured according to this size. Among the numerous manufacturers and models of metallographic inlay machines, MetLab's METPRESS metallographic inlay machine from the United States is enough!

The METPRESS series metallographic inlay machine from MetLab in the United States comes in two models, the single cylinder METPRESS A and the dual cylinder METPRESS-2. Although they are all imported products, compared to other imported equipment of the same type, they are economical and practical instruments and equipment, which not only meet strict user requirements but also save procurement costs for users. They are particularly trusted by users.

METPRESS series metallographic inlay machine, automatic water cooling system, single cylinder capable of simultaneously embedding 2 samples; The dual cylinder can simultaneously embed 4 samples, and each single cylinder can be independently controlled. Ability to program, download, and save embedded programs; LCD touch screen, friendly operation interface, real-time display of current actual temperature and pressure; Its sliding on/off, buckle locking, labor-saving and safe, avoiding burns and accidental operation. Equipped with pre heating function, it shortens the embedding time and improves work efficiency. The embedding pressure and temperature are adjustable, making the embedding range wider and the function more comprehensive, suitable for embedding different material samples.

METPRESS series metallographic inlay machine, with optional sizes of inlay cylinder including 1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm. These dimensions are fully capable of meeting the requirements Φ The technical requirements for embedding samples of 50mm and below, therefore, Φ For samples of 50 and below, the METPRESS metallographic inlay machine is sufficient! Moreover, the sample cylinder components of the METPRESS metallographic inlay machine can be quickly replaced. Simple structure, beautiful and durable, easy to clean, and easy to maintain. Low noise, easy to operate. It can be said that one machine is in hand, and small samples can be embedded all over the line!

For more details, please contact the engineer of Kemai Testing for consultation, or go to Kemai Testing Nanjing Laboratory for on-site testing.