Below: Low speed precision metallographic cutting machine METCUT-5

1. Before use, the equipment (low speed precision metallographic cutting machine METCUT-5) must be intact and free from faults.


2. The operating platform must be stable.


3. Adequate lighting should be provided during nighttime use.


4. Do not operate under the influence of alcohol, medication, or fatigue.


5. After clamping, the machine should be turned on for idle inspection, and there should be no shaking or abnormal noise.


6. Cover the protective cover when using it


7. Operation can only be carried out after the cutting blade stops rotating.


8. Metallographic cutting machines shall not be used for other purposes.


9. Wear protective glasses.


10. When cutting, do not have unrelated personnel nearby.


11. Do not touch the device with wet hands.


12. After use, clean it.


13. Regularly check whether the emergency stop button can cut off the power supply and brake in a timely manner.


14. If a malfunction occurs, maintenance operations must be carried out by professional and trained personnel.


15. If you have any questions, you can refer to the user manual or consult the manufacturer.


If you have any other issues with metallographic equipment or metallographic sample preparation, please log in to the official website www.qmaxis.cn for technical exchange with Kemai's engineers, or visit Kemai Testing Nanjing Laboratory for on-site testing.